Thermal Characterization Lab

LABORATORIES

The measurement of the thermal conductivity of different materials, which is a rather tricky measurement, has been the subject of different developments of the group, and currently we have different ways of measuring it for bulk, thin film and nanostructures.

At our facilities we offer the service of thermal conductivity measurements. Both solid and liquid samples can be measured. Please contact us by FINDER email for specific information about this service.

LFA 1000 High performance Laser Flash measurements

We offer an external service measurement. Please contact us by FINDER email for details.

LFA 1000 High performance Laser Flash measurements (from -125ºC to 500ºC)

The Linseis LFA 1000 Laser Flash is the most modular and precise instrument for the determination of Thermal Diffusivity, Conductivity and Specific Heat. The Flash Method determines the thermal diffusivity. Using a suited reference material, it is also possible to measure the specific heat capacity in a comparative method. The thermal diffusivity, specific heat capacity and the density can then be used to calculate the thermal conductivity. The norms count for the Flash Method:

ASTM E1461- Standard Test Method for Thermal Diffusivity by the Flash Method
ASTM E2585-09(2015) Standard Practice for Thermal Diffusivity by the Flash Method

Photoacoustic technique

This technique is able to measure thermal conductivity at room temperature of bulk, thin or thick films and porous structures.

Fabrication labs

ELECTROCHEMISTRY LAB

SPUTTERING AND THERMAL EVAPORATION LAB

Electric Characterization Lab

HALL MEASUREMENTS

THERMOELECTRIC POWER FACTOR MEASUREMENT